Thanks for your purchase of this XPRO-C/N/S/F/O wireless flash trigger.This wireless flash trigger is suitable for using Canon,Nikon,Sony,Fujifilm,Pentax,Olympus&Panasonic cameras to control Godox flashes with X system e.g. camera flash, outdoor flash, and studio flash.Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it gives photographers unparalleled flexibility and control over their strobist setups. The flash trigger applies to hotshoe-mounted Canon,Nikon,Sony,Fujifilm,Olympus&Panasonic series cameras, as well as the cameras which have PC sync sockets.With XPRO-C/N/S/F/O/P wireless flash trigger, high speed synchronization is available for most of camera flashes in the market which support TTL. The max flash synchronization speed is up to 1/8000s *.
● Built-in Godox 2.4G Wirless x system & Versatile Using Methods : As a Wireless Canon Speedlites Trigger ( for camera flash,outdoor flash and studio flash )；As a Wireless Godox Flash Trigger；As a Wireless Shutter Release Trigger；As a Flash (without Godox x system Trigger As a Wireless Shutter Release Trigger with 2.5mm Sync Cord Jack
● Support E-TTL II Autoflash and Professional Functions : 16 groups and 32 channels to wirelessly control and trigger Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively；Fully support TTL autoflash, 118000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shoot setting, group modeling lamp control group zooming, adjusting all groups output value simultaneously, etc.
● Outstanding Design，5 group buttons and 4 function buttons offer convenient manipulation；Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.
● Compatible cameras : Canon,Nikon,Sony,Fujifilm,Pentax,Olympus&Panasonic camera ( autoflash ) Support for the cameras that have PC sync socket.
● Power support : 2*AA Batteries
● TTL autoflash : E-TTL II
● Manual flash : Yes
● Stroboscopic flash : Yes
● High-speed sync : Yes
● Second-curtain sync : Yes
● Flash exposure compensation : Yes, ±3stops in 1/3 stop increments
● Flash exposure lock Yes
● Focus assist : Yes
● Modeling lamp : Control the modeling lamp by the flash trigger
● Beeper : Control the beeper by the flash trigger
● Wireless setting : The receiver end can control the camera shooting through the 2.5mm sync cord jack
● ZOOM setting : Adjust the ZOOM value by the transmitter
● TCM function : Transform the TTL shooting value into the output value in the M node
● Firmware upgrade : Memory function
● Upgrade through the Type-C USB port : Settings will be stored 2 seconds after last operation and recover after a restart
● Transmission range (approx.) : 0-100m
● Built-in wireless : 2.4G
● Modulation mode : MSK
● Channel : 32
● VVireless ID : 01-99
● Group : 16
● Display : Large LCD pa., backlighting ON or OFF
● Dimension/Weight : 90x58x50mm/80g